네트워크 장애시 확인해볼것
페이지 정보
본문
1. #vi /etc/sysconfig/network-scripts/ifcfg-eth0
위 명령어를 이용하여 파일내부에 설정되있는 부분을 확인한다.
P.S ) 넷마스크부분이 잘못되어있어도 외부로 핑은 발송이된다.
핑이 나가더라도 넷마스크부분을 확인해봐야한다.
2. #ethtool eth0~x 까지 명령어를 내려보면서 포트와 연결이되있는지 확인한다.
ex ) # ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
위 명령어를 이용하여 파일내부에 설정되있는 부분을 확인한다.
P.S ) 넷마스크부분이 잘못되어있어도 외부로 핑은 발송이된다.
핑이 나가더라도 넷마스크부분을 확인해봐야한다.
2. #ethtool eth0~x 까지 명령어를 내려보면서 포트와 연결이되있는지 확인한다.
ex ) # ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
- 이전글subnet (bit / hosts) 정리 20.11.24
댓글목록
등록된 댓글이 없습니다.